EggGen3: Difference between revisions
From SubeNews
Jump to navigationJump to search
No edit summary |
|||
| Line 15: | Line 15: | ||
This step will insure that everything stays put while you take your time applying Loctite and installing | This step will insure that everything stays put while you take your time applying Loctite and installing | ||
bolts for the last time.) | bolts for the last time.) | ||
* [[EggGen3:Disassembly|Overview of Gearbox Disassembly]] | * [[EggGen3:Disassembly|Overview of Gearbox Disassembly and Misc Gearbox Pictures]] | ||
* [[EggGen3:Pictures|Various Pictures of the Gearbox]] | * [[EggGen3:Pictures|Various Pictures of the Gearbox]] | ||
* [https://wiki.subenews.com/files/Gen3-Gearbox/Gen3-Gearbox-Video.wmv Gen3 Gearbox Video] | * [https://wiki.subenews.com/files/Gen3-Gearbox/Gen3-Gearbox-Video.wmv Gen3 Gearbox Video] | ||
== FAQs (Frequently Asked Questions) == | == FAQs (Frequently Asked Questions) == | ||
Revision as of 20:31, 8 August 2012
Eggenfellner Gen3 Gearbox
Manufacturer's Listed Specs
Gen3 Howto Guides
- Front Seal Upgrade Procedure Media:FrontSealUpgradeProcedure.pdf
- Gen 3 Gearbox Upgrade Procedure (from previous Generation Gearboxes) Media:G3_Upgrade.pdf
- Quinti Brush Block for G3 Gearbox (Service Bulletin) Media:SB_EarlyQuintiBlock.pdf
- Diagrams for making your own Gearbox Alignment Tool
If you make this tool, please use plus/minus .001" as a tolerance between all of the center distances.
- Gen 3 Gearbox Alignment Instructions Media:PropellerGearboxAlignmentProcedure.pdf
(Note: Add the following sentence at the end of step 12 in the Gearbox Alignment Instructions: "Tighten all bell housing bolts to approx. 250 lb.-in. then recheck alignment." This step will insure that everything stays put while you take your time applying Loctite and installing bolts for the last time.)
- Overview of Gearbox Disassembly and Misc Gearbox Pictures
- Various Pictures of the Gearbox
- Gen3 Gearbox Video
