EggGen3: Difference between revisions

From SubeNews
Jump to navigationJump to search
No edit summary
No edit summary
Line 14: Line 14:
     This step will insure that everything stays put while you take your time applying Loctite and installing  
     This step will insure that everything stays put while you take your time applying Loctite and installing  
     bolts for the last time.)
     bolts for the last time.)
* [[EggGen3:Pictures|Internal and External Gearbox Pictures]]  
* [[EggGen3:Disassembly|Overview of Gearbox Disassembly]]
* [[EggGen3:Pictures|Various Pictures of the Gearbox]]  


== FAQs (Frequently Asked Questions) ==
== FAQs (Frequently Asked Questions) ==

Revision as of 14:55, 11 March 2011

Eggenfellner Gen3 Gearbox

Manufacturer's Listed Specs

Gen3 Howto Guides

   (Note: Add the following sentence at the end of step 12 in the Gearbox Alignment Instructions:
   "Tighten all bell housing bolts to approx. 250 lb.-in. then recheck alignment."
   This step will insure that everything stays put while you take your time applying Loctite and installing 
   bolts for the last time.)

FAQs (Frequently Asked Questions)