Members:List

Membership List

Randy Russell H4 Quuinti/Warp RV9A Peterborough, Ontario, Canada. At 26.2 hours, I had a piston break - fixed. Now Gen 3 now is rattling. Teardown.

Benny Butler H6 IVO In Flight Adj Gen3V4 RV7 West Plains Missouri. 265 hrs

David Gilbert, H4, Quinti/Warp, Gen3V4, RV9A, Othello, WA, still building.

Mike Creer, H4 DOHC, Gen3V4, Zenith CH250, Indianapolis, IN, Building.

Carsten Schanche, H6 w. SDS ECU, Gen3V4, MT, RV-7A, Londonderry, NH, USA, cowl/fairings.

Allan Christer, H-6 w/SDS ECU, Gen 3.4, MT, RV-9A (destroyed in forced landing, but had 60 hours) Ulaanbaatar, Mongolia. Will build again w/Lyc

John Stiegelmeyer, H6 MT prop, EXP bus, EIS instruments, Gen 3 v 4, RV-7A Vinton, Iowa, USA flying 44 hrs plus. cooling problems.

Glenn Murray, RV9A, H6, Gen 3v4, Sensenich 3 blade ground adjustable, Doylestown, PA. 56 hrs

Bob Beach, Zenith STOL CH 801, H6, Gen3v4, Ivo in-flight adj, Lafayette, La, flying since June 2007, 215 hours

Dennis Glaeser, RV7A, H6, Gen3v4, IVO in-flight adj, Rochester Hills MI, flying since Mar 08 (165 hrs. as of Jan 10).

Kelly Landrum, RV6, H4 S/C, Gen3v4, Vari-Prop, Halifax,Va. 165 hrs.

Heinz Leuters, Robin DR380, 2007 H-6, Gen3v4, MTV-18, Muenster, Germany/EUROPE, 220 hrs. as of June 2010 (flying since SEP 2008)

Lee Apaka RV-7 2004 H6 Gen3v4 GB, MTV-7 prop, SDS EFIS, Fairfield, CA 298hrs

Carlos Trigo, RV-9A, Eggenfelnner early H-6, Gen3v4, MTV-7, Cascais - PORTUGAL, Ready to FLY

Larry Simpson, RV7A, Eggenfellner early H-6, Gen3v4, MTV-7, Tampa, FL, 125 hrs.

Pete Krok, RV-7A, Eggenfellner H4 (s/c), Gen3v4, MTV-7, Redlands, CA, 265 hrs.

DeWitt (Dee) Whittington, Sportsman 2+2, Eggenfellner E6 3.6L, changed to Geared Drives 200Z Zero Offset PSRU, Quinti-Sensenich 4-blade prop, planning on new larger radiators, modified Egg cowl, Richmond, VA, not flying yet.