Members:Projects

Member Projects

Glasair

• Andy Plunkett - Glasair I FT - converted own 2001 H4 w/ Marcotte PSRU

• Allen Burruss, Glasair FT S-II Egg 3.6 major mods on Egg exhaust currently wiring

Glastar

• Andrew Stagg: GlaStar C-FTEF, 2001 H4, QuintiAvio prop, FlySpeed controller, Subaru factory ECU. Wiki Page Click Here

Sportsman 2+2

• Dj Merrill - Sportsman 2+2 w/ Eggenfellner H6

RV-7(a)

• Brian Meyette - RV7a w/ Eggenfellner STi
• Michael and Gayle's RV7a
• Andre Kerstens - Eggenfellner H6 powered RV7a
• Carsten Schanche - RV-7A. Initially an Eggenfellner STi customer, now H6 w.SDS ECU, MT7 prop; working on cowl and fairings. No web site.
• Dennis Glaeser - RV7A H6 (has a 'factory' SDS ECU) GenIIIV4 GB, IVO Prop. Flying since Mar 2008.
• Tim Sweeney - RV7A H4 Gen3(Ver1?) MT Prop 470hours Kissimmee, Fla

RV-8(a)

• Mike Guarino, Sandy, Ut. H-6/four radiators, cowl flap, shark gills bottom of cowl, 2 external scoops bottom aft of cowl: 1. oil cooler and 2. engine induction air; MT7-C prop; 42 hrs. flight time

Adding sound attenuation materials/no mufflers/Can't communicate inside cockpit, therefore, radio xmissions are likely not readable.

RV-9(a)

• Randy Russell Peterborough, Ontario, Canada H4 Quinti/Warp C-GYOO Ready for final inspection. http://www.mykitlog.com/rock5219

• Carlos Trigo, Cascais - Portugal, RV-9A with Eggen H-6 and MT prop

• Dave Nicholson - Waverly, Iowa, USA RV-9A H4 Quinti/Warp N347N Flying since 11/04 156 hr.

• David Gilbert, Othello, Washington, RV-9A, H4, Quinti/Warp, Gen3V4, finishing canopy

• Richard Tasker, Randolph, NJ, RV-9A, H4 w/SC, MT three blade, Gen3v4, lots of little stuff to complete

Zenith CH250

• Mike Creer, Indianapolis, IN, H4 DOHC, Gen3V4, Building.

Other

• Jon Finley - Q2 w/ EJ-22 Direct-Drive