EggGen3:Seal: Difference between revisions

From SubeNews
Jump to navigationJump to search
Created page with "== Gen 3, v 4 Front Seal Information == The manufacturer is Harwal, and you will need to call them to find a distributor in your area. Harwal (East): 802-223-0197, Harwal (West..."
 
No edit summary
Line 1: Line 1:
== Gen 3, v 4 Front Seal Information ==
= Gen 3, v 4 Front Seal Information =


The manufacturer is Harwal, and you will need to call them to find a distributor in your area.  Harwal (East): 802-223-0197, Harwal (West): 303-373-1446.   
The manufacturer is Harwal, and you will need to call them to find a distributor in your area.  Harwal (East): 802-223-0197, Harwal (West): 303-373-1446.   

Revision as of 17:35, 5 April 2014

Gen 3, v 4 Front Seal Information

The manufacturer is Harwal, and you will need to call them to find a distributor in your area. Harwal (East): 802-223-0197, Harwal (West): 303-373-1446.

Harwal has an online 2009 Catalog, and the part number is:

Shaft Bore Width Type Material

90 x110 x 10 ADL FPM

90 mm ID (Shaft size); 110 mm OD (Bore); 10 mm width; ADL=Rubber-coated case, double lip seal surface; FPM=Viton

http://harwal.com/downloads/2009Catalog.pdf


I contacted Kaman Industrial at 916.372.7812 (a Harwal Distributor in Sacramento, CA) and talked to Franko to order the part.

Price: $58.00 US. Add Tax and shipping. (Note: the non-viton seals were $19.00 US).

Once I get the seal in hand, I will have a chance to compare against the old seal. Will let the group know the results.

Michael O