Members:Projects: Difference between revisions
From SubeNews
Jump to navigationJump to search
Chschanche (talk | contribs) |
|||
| (27 intermediate revisions by 9 users not shown) | |||
| Line 1: | Line 1: | ||
= Member Projects = | = Member Projects = | ||
== Glasair == | == Glasair == | ||
*[http://glasairproject.com Andy Plunkett - Glasair I FT - converted own 2001 H4 w/ Marcotte PSRU] | |||
*Allen Burruss, Glasair FT S-II Egg 3.6 major mods on Egg exhaust currently wiring | |||
* | |||
== | == Glastar == | ||
*Andrew Stagg: [[GlaStar C-FTEF]], 2001 H4, QuintiAvio prop, FlySpeed controller, Subaru factory ECU. [[GlaStar C-FTEF|Wiki Page Click Here]] | |||
* [ | |||
== | == Sportsman 2+2 == | ||
*[http://deej.net/sportsman Dj Merrill - Sportsman 2+2 w/ Eggenfellner H6] | |||
* | |||
== RV-6(a) == | |||
== RV-7(a) == | |||
* | *[http://www.meyette.us/RV-7Ahome.htm Brian Meyette - RV7a w/ Eggenfellner STi] | ||
*[http://www.mykitlog.com/users/index.php?user=mobrien02&project=100 Michael and Gayle's RV7a] | |||
*Carsten Schanche - RV-7A. Initially an Eggenfellner STi customer, now H6 w.SDS ECU, MT7 prop; preparing for registration and inspection. No web site. | |||
*Dennis Glaeser - RV7A H6 (has a 'factory' SDS ECU) GenIIIV4 GB, IVO Prop. Flying since Mar 2008. | |||
*Tim Sweeney - RV7A H4 Gen3(Ver1?) MT Prop 470hours Kissimmee, Fla | |||
== RV- | == RV-8(a) == | ||
*Mike Guarino, Sandy, Ut. H-6/four radiators, cowl flap, shark gills bottom of cowl, 2 external scoops bottom aft of cowl: 1. oil cooler and 2. engine induction air; MT7-C prop; 42 hrs. flight time | |||
* Mike | |||
== | Adding sound attenuation materials/no mufflers/Can't communicate inside cockpit, therefore, radio xmissions are likely not readable. | ||
* | |||
April 2010: sound material + exhaust pipe extensions curving downward did the job. Pilot/passenger comm is excellent. May: One Airtec fuel pump faulty.... 57 psi, but hiccups under climb. Aux pump does the job OK. I am adding a NAPA clone of the airtec. | |||
*Jack Clark, Pensacola, FL E-6 mounted and generally finished. Will be installing a MT7-C prop. Will have an Eggenfellner cowling with cowl flap. | |||
Just finished installing the throttle cable. Have several finishing details to complete then I plan to rivet the front top skin in place then start all of the fiberglass work. | |||
My Builder site is: | |||
http://www.mykitlog.com/users/index.php?user=jackclark&project=211 | |||
== RV-9(a) == | |||
*Randy Russell Peterborough, Ontario, Canada H4 Quinti/Warp C-GYOO Ready for final inspection. http://www.mykitlog.com/rock5219 | |||
*Carlos Trigo, Cascais - Portugal, RV-9A with Eggen H-6 and MT prop | |||
*Dave Nicholson - Waverly, Iowa, USA RV-9A H4 Quinti/Warp N347N Flying since 11/04 156 hr. | |||
*David Gilbert, Othello, Washington, RV-9A, H4, Quinti/Warp, Gen3V4, finishing canopy | |||
*Richard Tasker, Wolfeboro, NH, RV-9A, H4 w/SC, MT three blade, Gen3v4, SDS ECU, done except for upholstery and final glass; hope to fly Summer 2022 | |||
== RV-10 == | |||
== Zenith CH250 == | |||
*Mike Creer, Indianapolis, IN, H4 DOHC, Gen3V4, Building. | |||
== Other == | |||
Latest revision as of 00:12, 4 January 2022
Member Projects
Glasair
- Allen Burruss, Glasair FT S-II Egg 3.6 major mods on Egg exhaust currently wiring
Glastar
- Andrew Stagg: GlaStar C-FTEF, 2001 H4, QuintiAvio prop, FlySpeed controller, Subaru factory ECU. Wiki Page Click Here
Sportsman 2+2
RV-6(a)
RV-7(a)
- Brian Meyette - RV7a w/ Eggenfellner STi
- Michael and Gayle's RV7a
- Carsten Schanche - RV-7A. Initially an Eggenfellner STi customer, now H6 w.SDS ECU, MT7 prop; preparing for registration and inspection. No web site.
- Dennis Glaeser - RV7A H6 (has a 'factory' SDS ECU) GenIIIV4 GB, IVO Prop. Flying since Mar 2008.
- Tim Sweeney - RV7A H4 Gen3(Ver1?) MT Prop 470hours Kissimmee, Fla
RV-8(a)
- Mike Guarino, Sandy, Ut. H-6/four radiators, cowl flap, shark gills bottom of cowl, 2 external scoops bottom aft of cowl: 1. oil cooler and 2. engine induction air; MT7-C prop; 42 hrs. flight time
Adding sound attenuation materials/no mufflers/Can't communicate inside cockpit, therefore, radio xmissions are likely not readable.
April 2010: sound material + exhaust pipe extensions curving downward did the job. Pilot/passenger comm is excellent. May: One Airtec fuel pump faulty.... 57 psi, but hiccups under climb. Aux pump does the job OK. I am adding a NAPA clone of the airtec.
- Jack Clark, Pensacola, FL E-6 mounted and generally finished. Will be installing a MT7-C prop. Will have an Eggenfellner cowling with cowl flap.
Just finished installing the throttle cable. Have several finishing details to complete then I plan to rivet the front top skin in place then start all of the fiberglass work.
My Builder site is: http://www.mykitlog.com/users/index.php?user=jackclark&project=211
RV-9(a)
- Randy Russell Peterborough, Ontario, Canada H4 Quinti/Warp C-GYOO Ready for final inspection. http://www.mykitlog.com/rock5219
- Carlos Trigo, Cascais - Portugal, RV-9A with Eggen H-6 and MT prop
- Dave Nicholson - Waverly, Iowa, USA RV-9A H4 Quinti/Warp N347N Flying since 11/04 156 hr.
- David Gilbert, Othello, Washington, RV-9A, H4, Quinti/Warp, Gen3V4, finishing canopy
- Richard Tasker, Wolfeboro, NH, RV-9A, H4 w/SC, MT three blade, Gen3v4, SDS ECU, done except for upholstery and final glass; hope to fly Summer 2022
RV-10
Zenith CH250
- Mike Creer, Indianapolis, IN, H4 DOHC, Gen3V4, Building.
